|
|
| Browse Categories : | |
| Byron fuel for Helicopters use | ||
|
15% Nitro 20% Oil LowVis |
||
|
|
LE 260.00 |
|
|
Download manuals Accessories needed
|
||
|
Features: |
This is a top quality fuel made in U.S.A not a cheap blend! It is a straight synthetic fuel. The clean burning qualities of Synthetic Lubrication have always been desirable, but until Byron Fortified Synthetics were introduced, additional precautionary castor content outweighed any clean running benefits of synthetic lubricants. Modelers needed to pay special attention to attaining near perfect needle valve adjustments to protect against lean runs, and special care had to be taken to treat the engine to an after-run oil or bearing corrosion was a very strong possibility. Byron Synthetics eliminate both fears. Not only have Byron Synthetics been fortified with additional corrosion protection, but load carrying capacities have also been increased with special high-pressure additives. This straight Synthetic Fuel is formulated specifically for helicopter applications. . We will confidently place the lubricating qualities of our synthetic up against any competitions’ castor oils. |
|
|
Includes: |
One Us Gallon (3.78 Litters approx.) of fuel in high quality plastic container with secure lid. |
|
|
Requires: |
Nothing required |
|
| Specs: | Synthetic/Castor Ratio | : 100% synthetic |
| Nitro content | : 15% | |
| Total Oil content | : 20% LowVis | |
|
Comments: |
This fuel is good for helicopter engines in general except for engines that have special requirements stated by manufacturer. |
|